Connector Assignment X7 - Siemens SIMADYN D Hardware Manual

Input/output modules

5.3.3 Connector assignment X7

5-22
www.aotewell.com
Connector X7 (50 pin, sub D) connects signals for:
• 4 analog inputs
• 2*8 binary inputs and 2*8 binary outputs
Depending on the required function (signal conversion, LED display)
different interface modules can be connected to the binary inputs and
outputs. If interface modules with signal conversion are used, the SC54
cable must be used:
SC49 cable
max. 2 interface modules, type
SU10
(25 screw terminals,
no signal conversion)
Table 5-17 Cables and interface modules which can be connected at IT41, connector X7
sales@aotewell.com
Industry Automation
SC54 cable
max. 5 interface modules, type
SB10
SB60
SB61
SB70
SB71
SU12
Hardware - SIMADYN D
+86-755-8660-6182
Edition 12.2004