Application Information And Noise Immunity; Connector Assignment X5 - Siemens SIMADYN D Hardware Manual

Input/output modules

5.1.2 Connector assignment X5

SU11 terminal
assignment

5.1.3 Application information and noise immunity

Screening
5-4
www.aotewell.com
EA12 Significance
X5
1 Analog output 1
2 Ground
3 Analog output 2
4 Ground
5 Analog output 3
6 Ground
7 Analog output 4
8 Ground
9 Analog output 5
10 Ground
11 Analog output 6
12 Ground
13 Analog output 7
14 Ground
15 Analog output 8
16 Ground
17 Electronics ground
(connected with the
electronics ground via 0
Ohm resistor)
18 Electronics ground
(connected with the
electronics ground via 0
Ohm resistor)
19 Ground
20 Ground
Table 5-3 EA12 connector- and SU11 terminal assignment
All of the "ground" terminals are connected together via 0 Ohm resistors
and are connected to electronics ground via an associated inductance.
• operation without fan is possible
• noise-immune operation is only possible if the module is tightly screwed
into the subrack
The input/output signals must be screened on the plant/system side. The
screen must be connected through the largest possible surface area to the
screen rail between the interface module and where the cable enters or exits
the cabinet.
sales@aotewell.com
Associated SU11
test socket
X11 SIG 1
X11 COM 2
X12 SIG 3
X12 COM 4
X13 SIG 5
X13 COM 6
X14 SIG 7
X14 COM 8
X15 SIG 9
X15 COM 10
X16 SIG 11
X16 COM 12
X17 SIG 13
X17 COM 14
X18 SIG 15
X18 COM 16
--- 17
--- 18
--- 19
--- 20
Industry Automation
Connector
designation when
configuring
X5A
X5B
X5C
X5D
X5E
X5F
X5G
X5H
Hardware - SIMADYN D
Edition 12.2004
+86-755-8660-6182