Application Information - Siemens SIMADYN D Hardware Manual

Program memory modules / Interface modules

8.9.3 Application information

Other information
8.9.4 Pin/terminal assignment X1/X2
Conductor cross
section
SU10
8-44
www.aotewell.com
The interface modules can be mounted vertically and horizontally.
They are snapped onto a mounting rail, .
Further information on EMC and ambient conditions, refer to Section,
General technical data"
The screw terminal numbers of X2 are identical with the ribbon cable
connector numbering corresponding to the pin arrangement.
Interfacemodule
SU10, SU11, SU12
SU13
X1
1
2
3
23
24
25
26
Fig. 8-17 Circuit diagram, SU10
sales@aotewell.com
Minimum conductor
cross section for the
terminal block X2
0,2 mm²
0,2 mm²
X2
1
2
3
23
24
25
NC
Industry Automation
Maximum conductor
cross section for the
terminal block X2
2,5 mm².
1,5 mm².
Hardware - SIMADYN D
Edition 04.2011
+86-755-8660-6182