Supplementary Components; Application Information And Noise Immunity - Siemens SIMADYN D Hardware Manual

Aotewell Ltd

6.3.2 Supplementary components

Fiber-optic cable
Order designation

6.3.3 Application information and noise immunity

Hardware - SIMADYN D
Edition 12.2004
HongKong|UK|China
www.aotewell.com
The following fiber-optic cable is used for the coupling:
SINEC FIBER OPTIC CABLE standard cable,
assembled in pairs with 4 BFOC connectors
A detailed description of the fiber-optic cable is described in Catalog "SINEC
Industrial Communication Networks, IK 10".
Multiplier
Length code
Table 6-1 Fiber-optic cable Order No. and length code
• The CS1x, CS22 modules may only be used in a force-ventilated
subrack.
• The modules can only be used in SR12.x and SR24.x subracks (C bus
required).
• Before the power supply voltage of a subrack is switched-on (powered-
up), all of the plug connections of the fiber-optic cables involved must be
inserted.
In operation, the plug connectors of the fiber-optic cable coupling
may not be released.
• Master- and slave subracks can be powered-down while in operation
and powered-up again. The coupling is then re-established.
sales@aotewell.com
Communications support modules
6XV1 820-5B
0,1 m
H
1 m N
10 m T
100 m
U
0. 0
1. 1
2.
2
3.
3
4.
4
5.
5
6. 6
7.
7
8. 8
.0 0
.1
1
.2 2
.3 3
.4
4
.5 5
.6 6
.7
7
.8 8
Industry Automation
6
6-19
+86-755-8660-6182