Siemens SIMADYN D Hardware Manual page 2

Safety guidelines
DANGER
!
WARNING
!
CAUTION
!
CAUTION
NOTICE
Correct usage
Marken
Copyright  SIEMENS AG 2006 All rights reserved
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design,
are reserved.
Siemens AG
A&D AS CC DC
Frauenauracher Straße 80
91056 Erlangen
Siemens Aktiengesellschaft
Siemens Aktiengesellschaft
www.aotewell.com
This Manual contains notices which you should observe to ensure your own personal
safety, as well as to protect the product and connected equipment. These notices are
highlighted in the Manual by a warning triangle and are marked as follows according to
the level of danger:
indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
used with the safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
used without safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in property damage.
used without the safety alert symbol indicates a potential situation which, if not avoided,
may result in an undesireable result or state.
Note the following:
This device and its components may only be used for the applications described in the
catalog or the technical description, and only in connection with devices or components
from other manufacturers which have been approved or recommended by Siemens.
SIMATIC and SIMADYN D are registered trademarks of Siemens AG.
Third parties using for their own purposes any other names in this document which refer
to trademarks might infringe upon the rights of the trademark owners.
sales@aotewell.com
Disclaimer of Liability
We have checked the contents of this manual for agreement with
the hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement.
However, the data in this manual are reviewed regularly and any
necessary corrections included
Suggestions for improvement are welcomed.
 Siemens AG 2006
Technical data subject to change.
A5E01114837-02
Industry Automation
in subsequent editions.
+86-755-8660-6182