Program Memory Modules Ms5, Ms51, Ms52 - Siemens SIMADYN D Hardware Manual

Program memory modules / Interface modules
8.1

Program memory modules MS5, MS51, MS52

Order Nos.
Description
Installation /
programming
Program size
Memory overview
NOTE
8-2
www.aotewell.com
MS5: 6DD1610-0AH0
MS51: 6DD1610-0AK0
MS52: 6DD1610-0AH2
The MS5, MS51 and MS52 program memory modules are used to save
the processor program, configured by the user with HWConfig and CFC
(including the operating system).
The program memory module is inserted in the module receptacle of the
CPU module provided and the user program can be downloaded in two
ways:
• via a PCMCIA card, integrated in the PC (offline loading) (PC card)
• directly from the PC via a serial communications link into the memory
module inserted in the CPU module
(online loading)
The size of the software to be loaded into the memory module ("zipped"
to approximately 50%), and the size of the available program memory in
the CFC is displayed under the following memory item:
Target system / load / info
The differences in the application and the memory expansion of the MS5,
MS51 and MS52 program memory modules are shown in the following
table:
Application
Flash memory to store the configuring
software
EEPROM for operating parameters which
can be changed
Table 8-1 Application areas of the program memory modules
The flash memory is a non-volatile memory which can be electrically
programmed and erased.
PCMCIA and JEIDA
industry standard
68 pin memory card
sales@aotewell.com
Industry Automation
MS5 MS51
2 Mbyte 4 Mbyte
8 Kbyte 8 Kbyte
Write
protect
switch
Hardware - SIMADYN D
Edition 04.2011
+86-755-8660-6182
MS52
8 Mbyte
8 Kbyte