Professionally-Trained And Knowledgeable Personnel; Ce Mark; Connecting External Voltages; Mounting - Siemens SIMADYN D Hardware Manual

General technical data
1.1.4.2

Professionally-trained and knowledgeable personnel

1.1.4.3

CE Mark

NOTE
1.1.4.4

Connecting external voltages

1.1.5

Mounting

1.1.6

Cables

1.1.7

Potential bonding

1-6
www.aotewell.com
Only professionally-trained, knowledgeable personnel may configure,
install, commission and operate SIMADYN D.
SIMADYN D components have no CE Mark for the following reasons:
• they cannot be practically used autonomously
• they are not generally available
• they can only be used by specially-trained personnel
If a CE Mark is required, this is the responsibility of the manufacturer of
the machine/complete system.
If external voltages (e. g. pulse encoders) are connected to SIMADYN D
inputs, which are supplied from an external power supply, then this
external supply must also be shutdown when the SIMADYN D power
supply is shutdown or fails.
SIMADYN D components must be mounted in a metal cabinet, enclosed
on all sides.
All signal cables which are connected to SIMADYN D must be screened.
In order to ensure disturbance-free operation, the components which are
connected and communicate with one another may not be at different
potentials. This means that all components must be connected with one
another through potential bonding cables.
sales@aotewell.com
Industry Automation
Hardware - SIMADYN D
Edition 08.2005
+86-755-8660-6182