Mapd Price Element Code Descriptions; New Pecs - Avaya DEFINITY Manual

MAPD Price Element Code Descriptions

Following is a full description of these new PECs:
1273-cvu
Used to upgrade the CVLAN Server release 6.x on all vintage MAPD hardware
currently installed at all locations to CVLAN Server release 8.2 provisioned in V6
mode. The DLG software is also upgraded. This upgrade requires a site visit by
an Avaya Remote Field Engineer (RFE). This PEC only applies to MAPDs
currently installed at the customer's site. It requires an Avaya RFE to bring the
MAPD upgrade disk into the customer's location and physically insert it into the
MAPD. The RFE then calls the Technical Support Center (TSC,) and the TSC
engineer dials up this MAPD and performs the upgrade procedure. This is the
same upgrade procedure used by the RFE and TSC, in place today, to upgrade
the MAPD from CVLAN Server release 6.0.4 to CVLAN Server release 6.1.0.
This PEC code will also be used as a bug fix release for CVLAN release 6.1.0.
Feature enhancements available upgrading the MAPD from CVLAN
Server release 6.x to CVLAN Server release 8.2 provisioned in V6 Mode,
PEC 1273-cvu.
These are the same set of features available on a factory provisioned MAPD
configured with CVLAN Server release 8.2 in V6 Mode, PEC 1273-cvl.
Features available to CVLAN applications independent of the CVLAN Client
release.
Upgrading the CVLAN Server on the MAPD to CVLAN Server release 8.2
presents several feature enhancements to the MAPD and CVLAN applications.
Certain application feature enhancements are only recognized using the CVLAN
Client release 8.2 API set available in the CVLAN Client release 8.2 package. The
features listed below are not dependent on using the CVLAN Client release 8.2
package. These following feature enhancements are recognized regardless of
which CVLAN Client release is in use. In other words, the following feature
enhancements are recognized using either CVLAN Client release 6.1 or 8.2.
CVLAN per link ASAI association limit increase to 4096
This upgrade will increase the CVLAN per link ASAI association limit from
2048 to 4096. These ASAI associations are used for Call Control and
Domain Control of DEFINITY switch resources.
Customer accessible CVLAN ASAI message tracing utility
This upgrade will enhance the MAPD with a customer accessible CVLAN
ASAI message tracing utility. This CVLAN ASAI message tracing utility fully
supports the ASAI message protocol used in all versions of the DEFINITY
switch. It is the only Avaya tool, available today, which will properly decode
the full set of ASAI protocol messages used in all DEFINITY switches
currently in production. It is only available when PEC 1273-cvl or 1273-cvu
(CVLAN RTU) is ordered for the MAPD.
J-2 Issue 3 May 2002