Avaya DEFINITY Manual page 299

Returning the MAPD System to its
Original State
!
WARNING:
This procedure should only be performed by a Avaya services technician.
After using this procedure, you must reconfigure the MAPD applications or
restore the configuration parameters from the backup SanDisk PCMCIA
FlashDisk.
This procedure describes how to return the MAPD (with its associated
applications) to its original state if it should crash.
1. Make sure the administrative and/or maintenance terminal is physically
connected (either directly or through a modem) to Maint/Port A on the
TN801B board.
2. Power down the MAPD system assembly by disengaging it from the
DEFINITY system carrier.
3. Insert the PCMCIA Installation disk into the TN801B, and re-insert the
MAPD system assembly.
4. When the system is coming up, the terminal screen displays a message
similar to the following:
F
Issue 3 May 2002 F-1