Cv/Lan Port Status/Control - Avaya DEFINITY Manual

Field Names and Descriptions

CV/LAN Port Status/Control

DEFINITY
Node Port
ID State
Port
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
Press STATE, DROP, or MSGPER to effect this entry
CANCEL REFRESH
Screen 4-47. CV/LAN Port Status/Control
NOTE:
This screen will appear only if CV/LAN is also installed.
This screen can be used to view and/or change message traffic statistics.
Field Name
Port
Node ID
The DEFINITY
system Port State

CV/LAN Port Status/Control

Number of CV/LAN
Client Service
Connections State
MSGPER HELP
Description
Port number (1-12) used by the DEFINITY system. See
the "CV/LAN Administration"
clients are associated with a particular port.
Node ID used by CV/LAN Clients.
Read-only. Possible port states are as follows:
NOT CONNECTED — The BRI port is not administered
(or is busied out) on the DEFINITY system, or Layer
1 is down.
CONNECTED DOWN — The BRI port is administered
on the DEFINITY system but Layer 2 is not
established.
CONNECTED — The BRI port is administered on the
DEFINITY system and Layer 2 is established.
Messages Messages Message
to from Period
DEFINITY DEFINITY (minutes)
STATE UPDATE
screen to determine which
Issue 3 May 2002
DROP
4-77