Call Linear Scan; One-Touch Park - HIKVISION DS-9600NI-I8 Series User Manual

Call Linear Scan

Before operating this function, make sure the connected camera supports the linear scan and is in
HIKVISION protocol.
Purpose
Follow the procedure to call the linear scan in the predefined scan range.
Click on the quick settings toolbar of the PTZ camera's Live View.
The PTZ control panel displays on the right of the interface.
Click Linear Scan to start the linear scan and click it again to stop it.
(Optional) Click Restore to clear the defined left limit and right limit data.
Reboot the camera to have the settings take effect.

One-Touch Park

Before operating this function, make sure the connected camera supports linear scan and is in
HIKVISION protocol.
Purpose
Certain speed dome models can be configured to start a predefined park action (scan, preset,
patrol and etc.) automatically after a period of inactivity (park time).
Click on the quick settings toolbar of the PTZ camera's Live View.
The PTZ control panel displays on the right of the interface.
Click Park (Quick Patrol), Park (Patrol 1), or Park (Preset 1) to activate the park action.
Park (Quick Patrol): The dome starts patrolling from the predefined preset 1 to preset 32 in order
after the park time. Undefined presets will be skipped.
Park (Patrol 1): The dome starts moving according to the predefined patrol 1 path after the park
time.
Park (Preset 1): The dome moves to the predefined preset 1 location after the park time.
Network Video Recorder User Manual
73