Select the user level to Media User, Operator and Admin.
Click OK to save the settings.
Result:
The added user accounts have the permission to connect other devices to the device via ONVIF
protocol.
ONVIF protocol is disabled by default.
Managing IP Camera Activation
When you activate the device for the first-time access, you can set the activation password for the
IP camera (s) as well. Refer to Chapter 2.2 Activate the Device. And you can also manage the
password to enhance the security.
Go to System > System Service > IP Camera Activation.
Check the Change Password to enable the permission.
Enter the admin password of the device to obtain the permission.
In the text filed of the IP Camera Activation Password, enter the new strong
password for the cameras.
Click Apply to have the following pop-up attention box.
Network Video Recorder User Manual
Change IP Camera Activation Password
185