Test And Service Data - Sega MARIO & SONIC AT THE OLYMPICS GAMES TOKYO 2020 Owner's Manual

Table of Contents

Advertisement

9
EXPLANATION OF TEST AND DATA DISPLAY
Do not touch any parts that are not specified in these directions. Touching un-
specified locations may lead to electric shock or cause short circuits
● Be careful that your finger or hand does not get caught when opening/closing
the coin chute door
● Operating the TEST Button and SERVICE Button during Test Mode may be slightly
uncomfortable, due to the position of the buttons in relation to the cabinet
seats. Take care not to hurt your shoulder or back, or scratch yourself on any
parts of the cabinet
● When you enter the Test Mode, Fractional Coin and Bonus Adder data are
erased
● Adjust the sound to the optimum volume, taking into consideration the environ-
mental requirements of the installation location
● Removing the Coin Meter circuitry renders the game inoperable
● Have a flashlight on hand and operate in Test Mode very carefully. The cabinet
interior is dark and narrow and you could easily make mistakes in operation
The ALLS UX Game Board has a System Test Mode that is used to control settings pertinent to the
Game Board itself. Do not perform changes in the System Test Mode. Only qualified personnel or
SEGA technicians should operate settings in the System Test Mode.
Perform tests and data checks periodically by manipulating the TEST Button and SERVICE Button
in the cabinet. Follow the instructions in this chapter to conduct checks when the game machine
is first installed, when money is being collected, or when the game machine does not operate
properly.
Shown below are the tests and screens to be used for different problems.
9
35

Advertisement

Table of Contents
loading

Table of Contents