Configuring And Managing Ports And Vlans; Configuring And Managing Ports; Setting The Port Type - 3Com WX1200 3CRWX120695A Configuration Manual

5
Configuring and
Managing Ports

Setting the Port Type

C
ONFIGURING AND
P
ORTS AND
This chapter describes how to configure and manage ports and VLANs.
You can configure and display information for the following port
parameters:
Port type
Name
Speed and autonegotiation
Port state
Power over Ethernet (PoE) state
Load sharing
A WX switch port can be one of the following types:
Network port. A network port is a Layer 2 switch port that connects
the WX switch to other networking devices such as switches and
routers.
MAP access port. A MAP access port connects the WX switch to a
MAP. The port also can provide power to the MAP. Wireless users are
authenticated to the network through a MAP access port.
A Distributed MAP, which is connected to WX switches through
intermediate Layer 2 or Layer 3 networks, does not use a MAP access
port. To configure for a Distributed MAP, see "Configuring a MAP
Connection" on page 74 and Chapter 10, "Configuring MAP Access
Points," on page 177.
Wired authentication port. A wired authentication port connects the
WX switch to user devices, such as workstations, that must be
authenticated to access the network.
M
VLAN
S
ANAGING