Working With Files; Displaying A List Of Files - 3Com WX1200 3CRWX120695A Configuration Manual

602 C 27: M
HAPTER

Working with Files

Displaying a List of
Files
WX1200# dir
===============================================================================
file:
Filename
file:configuration
file:corp2:corp2cnfig
corp_a/
file:dangcfg
old/
file:pubsconfig-april062005
file:sysa_bak
file:testback
Total:
S F
ANAGING YSTEM ILES
The following section describe how to manage files stored on the WX
switch.
Files are stored on a WX switch in the following areas:
File — Contains configuration files
Boot — Contains system image files
Temporary — Contains log files and other files created by MSS
The file and boot areas are in nonvolatile storage. Files in nonvolatile
storage remain in storage following a software reload or power cycle. The
files in the temporary area are removed following a software reload or
power cycle.
The boot area is divided into two partitions, boot0 and boot1. Each
partition can contain one system image file.
The file area can contain subdirectories. Subdirectory names are indicated
by a forward slash at the end of the name. In the following example,
dangdir and old are subdirectories.
To display a list of the files in nonvolatile storage and temporary files, type
the following command:
159 Kbytes used, 207663 Kbytes free
Size Created
48 KB Jul 12 2005, 15:02:32
17 KB Mar 14 2005, 22:20:04
512 bytes May 21 2004, 19:15:48
14 KB Mar 14 2005, 22:20:04
512 bytes May 16 2004, 17:23:44
40 KB May 09 2005, 21:08:30
12 KB Mar 15 2005, 19:18:44
28 KB Apr 19 2005, 16:37:18