3Com WX1200 3CRWX120695A Configuration Manual page 655

Table 55 801.1X Attributes (continued)
Attribute Type
Reply- 18
Message
State 24
Class 25
Vendor- 26
Specific
Session- 27
Timeout
Supported Standard and Extended Attributes
Rcv in Sent in Sent in
Access Access Acct
Resp? Reqst? Reqst?
Yes No No
Yes Yes No
Yes No Yes
Yes No Yes
Yes No Optional Maximum number of
655
Description
String. Text that can be
displayed to the user.
Multiple Reply-Messages
can be included. If any are
displayed, they must
appear in the order in
which they appear in the
packet.
Can be sent by a RADIUS
server in an
Access-Challenge message
to the WX switch. If the
WX receives an
Access-Challenge with this
attribute, it returns the
same State value in an
Access-Request response
to the RADIUS server,
when a response is
required. (For details, see
RFC 2865.)
If received, this
information must be sent
on, without interpretation,
in all subsequent packets
sent to the RADIUS server
for that client session.
String. Allows MSS to
support 3Com VSAs. (See
Table 56 on page 659.)
seconds of service allowed
the user before
reauthentication of the
session.
If the global
reauthentication timeout
(set by the set dot1x
reauth-period command)
is shorter than the
session-timeout, MSS uses
the global timeout instead.