Configuring Multicast Vlan Ports - 3Com 4500G Family Configuration Manual

Follow these steps to configure user port attributes:
To do...
Enter system view
Enter port view or port group
view
Configure the user port link
type as hybrid
Specify the user VLAN that
comprises the current user
port(s) as the default VLAN
Configure the current user
port(s) to permit packets of the
specified multicast VLAN(s) to
pass and untag the packets
For details about the port link-type, port hybrid pvid vlan, and port hybrid vlan commands, refer to
VLAN Commands in the Access Volume.

Configuring Multicast VLAN Ports

In this approach, you need to configure a VLAN as a multicast VLAN and then assign user ports to this
multicast VLAN by either adding the user ports in the multicast VLAN or specifying the multicast VLAN
on the user ports. These two configuration methods give the same result.
Configuring multicast VLAN ports in multicast VLAN view
Follow these steps to configure multicast VLAN ports in multicast VLAN view:
To do...
Enter system view
Configure the specified VLAN as
a multicast VLAN and enter
multicast VLAN view
Assign ports to the multicast
VLAN
Use the command...
system-view
interface interface-type
interface-number
port-group { manual
port-group-name |
aggregation agg-id }
port link-type hybrid
port hybrid pvid vlan vlan-id
port hybrid vlan vlan-id-list
untagged
Use the command...
system-view
multicast-vlan vlan-id
port interface-list
1-5
Remarks
—
Required
Use either command
Required
Access by default
Required
VLAN 1 by default
Required
By default, a hybrid port permits
only packets of VLAN 1 to pass.
Remarks
—
Required
Not a multicast VLAN by
default
Required
By default, a multicast VLAN
has no ports.