3Com WX1200 3CRWX120695A Configuration Manual page 305

Wireless lan mobility system wireless lan switch and controller
Hide thumbs Also See for WX1200 3CRWX120695A:
Table of Contents

Advertisement

WX1200# display service-profile sp1
ssid-name:
Beacon:
DHCP restrict:
Short retry limit:
Auth fallthru:
Enforce SODA checks:
Custom success web-page:
Custom logout web-page:
Static COS:
CAC mode:
User idle timeout:
Keep initial vlan:
Web Portal ACL:
WEP Key 1 value:
WEP Key 3 value:
WEP Unicast Index:
Shared Key Auth:
WPA enabled:
ciphers: cipher-tkip, cipher-wep40
authentication: 802.1X
TKIP countermeasures time: 60000ms
...
WX1200# display ap config
Port 5: AP model: mp-241, POE:
boot-download-enable: YES
force-image-download: YES
Radio 1: type: 802.11a, mode:
tx pwr:
1, profile: rp2
TKIP is already enabled by default when WPA is enabled.
6 Display the service profile wpa-wep to verify the changes. Type the
following command:
mycorp
<none>
<none>
7 Map service profile wpa-wep to radio profile rp2. Type the following
commands:
WX1200# set radio-profile rp2 service-profile wpa-wep
success: change accepted.
8 Apply radio profile rp2 to radio 1 on port 5 and to radios 1 and 2 on
port 6, enable the radios, and verify the configuration changes. Type the
following commands:
WX1200# set ap 5,6 radio 1 radio-profile rp2 mode enable
success: change accepted.
WX1200# set ap 6 radio 2 radio-profile rp2 mode enable
success: change accepted.
enable, bias: high, name: MAP05
enabled, channel: 36
Encryption Configuration Scenarios
ssid-type:
yes
Proxy ARP:
no
No broadcast:
5
Long retry limit:
none
Sygate On-Demand (SODA):
yes
SODA remediation ACL:
Custom failure web-page:
Custom agent-directory:
no
COS:
none
CAC sessions:
180
Idle client probing:
no
Web Portal Session Timeout:
WEP Key 2 value:
WEP Key 4 value:
1
WEP Multicast Index:
NO
305
crypto
no
no
5
no
0
14
yes
5
<none>
<none>
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents