Viewing Fdb Information; Viewing Arp Information - 3Com WX1200 3CRWX120695A Configuration Manual

636 C A: T
HAPTER ROUBLESHOOTING A
Viewing FDB
Information
WX1200# display fdb
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG Dest MAC/Route Des [CoS]
---- ---- ------------------ -----
130 3 00:05:5d:7e:94:83
130 130 00:02:2d:85:6b:4d
130 130 00:0b:0e:12:34:56
130 130 00:0b:0e:02:76:f6
130 2 00:02:2d:86:bd:38
130 3 00:05:5d:84:d3:d3
4097 00:0b:0e:00:04:30
4096 00:0b:0e:00:04:30
130 00:0b:0e:00:04:30
Total Matching FDB Entries Displayed = 32
dynamic = 27, static=0, permanent=0, system=5
Viewing ARP
Information
WX1200# display arp
ARP aging time: 1200 seconds
Host
------------------------------ ----------------- ----- ------- --------
10.8.1.1
10.8.107.1
WX S
WITCH
(For more information about AAA, see Chapter 3, "Configuring AAA for
Administrative and Local Access," on page 51 and Chapter 21,
"Configuring AAA for Network Users," on page 433.)
The display fdb command displays the hosts learned by the WX switch
and the ports to which they are connected. To display forwarding
database (FDB) information, type the following command:
#
#
#
(For more information about forwarding databases, see "Managing the
Layer 2 Forwarding Database" on page 96.)
The display arp command displays the ARP aging timer and ARP entries
in the system. To display ARP information, type the following command:
HW Address
00:30:b6:3e:5c:a8
00:0b:0e:00:04:0c
(For more information about ARP, see "Managing the ARP Table" on
page 130.)
Destination Ports or VCs/[Protocol Type]
-----------------------------------------
1
t:192.168.14.6
t:192.168.15.5
t:192.168.14.6
3
1
CPU
CPU
CPU
VLAN
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
Type State
1 DYNAMIC RESOLVED
1 LOCAL RESOLVED