In the following example, bob.mycorp.com uses Bonded Auth, and the
Bonded Auth period is set to 60 seconds.
WX1200# display dot1x config
'host/bob-laptop.mycorp.com' on ssid 'mycorp' doing PASSTHRU
'bob.mycorp.com' on ssid 'mycorp' doing PASSTHRU (bonded)
802.1X parameter
----------------
supplicant timeout
auth-server timeout
quiet period
transmit period
reauthentication period
maximum requests
key transmission
reauthentication
authentication control
WEP rekey period
WEP rekey
Bonded period
Information for the 802.1X authentication rule for the machine
(host/bob-laptop.mycorp.com) is also displayed. However, the bonded
option is configured only for the user authentication rule. The bonded
option applies only to the authentication rules for users, not the
authentication rules for machines.
Configuring 802.1X Authentication
802.1X user policy
----------------------
setting
-------
30
30
60
5
3600
2
enabled
enabled
enabled
1800
enabled
60
455