Creating A Subdirectory; Removing A Subdirectory - 3Com WX1200 3CRWX120695A Configuration Manual

608 C 27: M
HAPTER ANAGING
Creating a
Subdirectory
WX1200# mkdir corp2
success: change accepted.
WX1200# dir
===============================================================================
file:
Filename
file:configuration
file:configuration.txt
corp2/
corp_a/
file:dangcfg
dangdir/
old/
Total:
===============================================================================
Boot:
Filename
*boot0:bload
*boot0:WXB03002.Rel
boot1:WXB03001.Re1
Boot0: Total:
Boot1: Total:
===============================================================================
temporary files:
Filename
Total:
Removing a
Subdirectory
S F
YSTEM ILES
You can create subdirectories in the user files area of nonvolatile storage.
To create a subdirectory, use the following command:
mkdir [subdirname]
To create a subdirectory called corp2 and display the root directory to
verify the result, type the following commands:
33 Kbytes used, 207822 Kbytes free
8928 Kbytes used, 3312 Kbytes free
8197 Kbytes used, 4060 Kbytes free
0 bytes used, 93537 Kbytes free
To remove a subdirectory from nonvolatile storage, use the following
command:
rmdir [subdirname]
To remove subdirectory corp2, type the following example:
WX1200# rmdir corp2
success: change accepted.
Size
17 KB May 21 2004, 18:20:53
379 bytes May 09 2004, 18:55:17
512 bytes May 21 2004, 19:22:09
512 bytes May 21 2004, 19:15:48
13 KB May 16 2004, 18:30:44
512 bytes May 16 2004, 17:23:44
512 bytes Sep 23 2003, 21:58:48
Size
746 KB May 09 2004, 19:02:16
8182 KB May 09 2004, 18:58:16
8197 KB May 21 2004, 18:01:02
Size
Created
Created
Created