Disabling Keepalive Probes; Changing Or Disabling The User Idle Timeout - 3Com WX1200 3CRWX120695A Configuration Manual

566 C 25: M S
HAPTER ANAGING ESSIONS
MSS temporarily keeps session information for disassociated web-portal
clients to allow them time to reassociate after roaming. (See "Configuring
the Web Portal WebAAA Session Timeout Period" on page 477.)
Disabling Keepalive To disable or reenable keepalive probes in a service profile, use the
Probes following command:
set service-profile name idle-client-probing {enable |
disable}
Changing or To change the user idle timeout for a service profile, use the following
Disabling the User command:
Idle Timeout
set service-profile name user-idle-timeout seconds
For example, to change the user idle timeout for service profile sp1 to 6
minutes (360 seconds), use the following command:
WX1200# set service-profile sp1 user-idle-timeout 360
success: change accepted.
To disable the user idle timeout, use the following command:
WX1200# set service-profile sp1 user-idle-timeout 0
success: change accepted.