3Com WX1200 3CRWX120695A Configuration Manual page 201

Example Boot of
MAP with Static IP
Configuration
DAP 1
static IP: 172.16.0.42
5
1 MAP sends a DHCP Discover message from the MAP's port 1.
2 Because WX1 is configured for direct attachment, WX1 responds
privately to the MAP and provides the MAP with its operational image (or
indicates that the MAp should use a locally stored image) and
configuration from WX1. Only in the event of a physical port failure
would the MAP attempt to boot from its port 2, in which case both WX1
and WX2 would respond to the broadcast Find WX message.
Figure 17 shows an example of the boot process for a MAP configured
with static IP information. In the example, the MAP has been configured
to use the following:
Static IP address: 172.16.0.42, netmask: 255.255.255.0, default
router 172.16.0.20
Boot WX switch: wxr100, DNS server: 172.16.0.1
Figure 17 MAP Booting with a Static IP Address
1
Layer 2
MAP Overview
DNS Server
172.16.0.1
2
4
6
MX Switch
WX Switch
System FQDN:
mxr2
201