3Com WX1200 3CRWX120695A Configuration Manual page 35

rollback
save
set
telnet
traceroute
WX1200# display i?
ifm
igmp
interface
ip
Remove changes to the edited ACL table
Save the running configuration to persistent storage
Set, use 'set help' for more information
telnet IP address [server port]
Print the route packets take to network host
For more information on help, see the help command description in the
Wireless LAN Switch and Controller Command
To see a subset of the online help, type the command for which you want
more information. For example, the following command displays all the
commands that begin with the letter i:
display interfaces maintained by the interface manager
display igmp information
display interfaces
display ip information
To see all the variations, type one of the commands followed by a
question mark (?). For example:
WX1200# display ip ?
alias
dns
https
route
telnet
To determine the port on which Telnet is running, type the following
command:
WX1200# display ip telnet
Server Status
----------------------------------
Enabled
display ip aliases
display DNS status
display ip https
display ip route table
display ip telnet
Port
3
Using CLI Help
Reference.
35