Displaying Blocked Stp Ports; Displaying Spanning Tree Statistics - 3Com WX1200 3CRWX120695A Configuration Manual

Displaying Blocked
STP Ports
WX1200# display spantree blockedports vlan default
Port Vlan STP-State
------------------------------------------------------------------------
2 190
Number of blocked ports (segments) in VLAN 1 : 1
Displaying Spanning
Tree Statistics
To display information about ports that are in the STP blocking state, use
the following command:
display spantree blockedports [vlan vlan-id]
To display information about blocked ports on a WX switch for the
default VLAN (VLAN 1), type the following command:
Cost
Blocking 4
(For information about the fields in the output, see the
Switch and Controller Command
To display STP statistics, use the following command:
display spantree statistics [port-list [vlan vlan-id]]
To display STP statistics for port 1, type the following command:
WX1200# display spantree statistics 1
BPDU related parameters
Port 1
spanning tree enabled for VLAN = 1
port spanning tree
state
port_id
port_number
path cost
message age (port/VLAN)
designated_root
designated cost
designated_bridge
designated_port
top_change_ack
config_pending
port_inconsistency
Displaying Spanning Tree Information
Prio Portfast
128 Disabled
Reference.)
VLAN 1
Wireless LAN
enabled
Forwarding
0x8015
0x15
0x4
0(20)
00-0b-0e-00-04-30
0x0
00-0b-0e-00-04-30
38
FALSE
FALSE
none
363