Port And Vlan Configuration Scenario - 3Com WX1200 3CRWX120695A Configuration Manual

100 C 5: C
HAPTER ONFIGURING AND
Port and VLAN
Configuration
Scenario
WX1200# set port 1 name mgmt
success: change accepted.
WX1200# set port 2 name finance
success: change accepted.
WX1200# set port 3 name accounting
success: change accepted.
WX1200# set port 4 name shipping
success: change accepted.
WX1200# set port 5-6 name lobby
success: change accepted.
WX1200# set port 7-8 name conf_room1
success: change accepted.
WX1200# display port status
Port Name
===============================================================================
1 mgmt
2 finance
3 accounting
4 shipping
5 lobby
6 lobby
7 conf_room1
8 conf_room1
WX1200# set system countrycode US
success: change accepted.
WX1200# display system
===============================================================================
Product Name:
System Name:
System Countrycode: US
System Location:
System Contact:
System IP:
System idle timeout: 3600
System MAC:
M P
ANAGING ORTS AND
This scenario assigns names to ports, and configures MAP access ports,
wired authentication ports, a load-sharing port group, and VLANs.
1 Assign names to ports to identify their functions, and verify the
configuration change. Type the following commands:
Admin Oper
up up
up down
up down
up down
up down
up down
up down
up down
2 Configure the country code for operation in the US and verify the
configuration change. Type the following commands:
WX1200
WX1200
0.0.0.0
00:0B:0E:00:04:0C
VLAN
S
Config Actual
auto 100/full
auto
auto
auto
auto
auto
auto
auto
Type Media
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx