328
C
16: C
HAPTER
ONFIGURING
Q
S
UALITY OF
ERVICE
Table 26 QoS Parameters (continued)
QoS Feature
Description
QoS parameters configured in service profiles
CAC mode
Call Admission Control, which
regulates addition of new VoIP
sessions on MAP radios. One of
the following modes can be
enabled:
None (the default)
Session-based
Static CoS
Simple CoS assignment. When
enabled, static CoS assigns the
same CoS value to all traffic on the
service profile's SSID. Static CoS is
disabled by default.
The default static CoS value is 0.
Using client DSCP
Whether MSS classifies the QoS
value
level of IP packets based on their
DSCP value, instead of their
802.11 priority.
Configuration Command
set service-profile cac-mode
See the following:
"Call Admission Control" on
page 340
"Configuring Call Admission
Control" on page 343
set service-profile static-cos
set service-profile cos
See the following:
"Static CoS" on page 341
"Configuring Static CoS" on
page 343
set service-profile
use-client-dscp
See "Using the Client's DSCP
Value to Classify QoS Level" on
page 344.