Creating A User Profile; Applying A Qos Policy To User Profile - 3Com 4210G Series Configuration Manual

Creating a User Profile

Configuration Prerequisites
Before creating a user profile, you need to configure authentication parameters. User profile supports
802.1X authentications. You need to perform the related configurations (for example, username,
password, authentication scheme, domain and binding between a user profile and user) on the client,
the device and authentication server.
Creating a User Profile
Follow these steps to create a user profile:
Enter system view
Create a user profile, and enter the
corresponding user profile view
Refer to 802.1x Configuration in the Security Volume for detailed information about 802.1x
authentication.

Applying a QoS Policy to User Profile

After a user profile is created, you need to configure detailed items in user profile view to implement
restrictions on the online users. Currently supported configurations are as follows:
Follow these steps to apply a QoS policy to traffic of online users:
To do...
Enter system view
Enter user profile view
Apply the QoS policy
To do...
Use the command...
system-view
user-profile profile-name
[ dot1x ]
qos apply policy policy-name
{ inbound | outbound }
Use the command...
system-view
user-profile
profile-name dot1x
11-2
Remarks
—
Required
If the specified user profile
already exists, you will directly
enter the corresponding user
profile view.
The configuration made in user
profile view takes effect when
the user profile is enabled and
the corresponding users are
online.
Remarks
—
Required
The configuration made in
user profile view takes effect
when the user-profile is active
and the corresponding users
are online.
Required