Remove The Server Blade; Remove The Access Panel - HPE ProLiant BL460c Gen10 User Manual

◦ For a controlled shutdown, select Momentary Press.
◦ For an emergency shutdown, select Press and Hold.
Before proceeding, verify that the server blade is in standby mode by observing that the system power
LED is amber.

Remove the server blade

Procedure
1. Identify the proper server blade.
2. Power down the server blade on page 21.
3. Remove the server blade.
4. Place the server blade on a flat, level work surface.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server blade
before beginning any installation procedure. Improper grounding can cause electrostatic
discharge.

Remove the access panel

Procedure
1. Power down the server blade on page 21.
2. Remove the server blade on page 22.
3. Place the server blade on a flat, level work surface.
22 Operations