Install the mezzanine assembly
Procedure
1. Install the mezzanine assembly
2. Install the access panel on page 23.
3. Install the server blade on page 42.
4. Power up the server blade on page 21.
Remove the FlexibleLOM
Procedure
1. Power down the server blade on page 21.
2. Remove the server blade on page 22.
3. Place the server blade on a flat, level work surface.
4. Remove the access panel on page 22.
5. Remove the mezzanine assembly on page 32.
6. Use the FlexibleLOM handle to remove the FlexibleLOM from the system board.
1
1
2
Operations
33