Remove An Nvme Ssd; Remove A Sas Or Sata Drive - HPE ProLiant BL460c Gen10 User Manual

Remove an NVMe SSD

Procedure
1. Observe the LED status of the drive and determine if it can be removed.
2. Remove the drive:
a. Press the power button.
The Do Not Remove button illuminates and flashes. Wait until the flashing stops and the Do Not
Remove button is no longer illuminated.
b. When the Do Not Remove button is no longer illuminated, press the Do Not Remove button and
then remove the drive.

Remove a SAS or SATA drive

1. Determine status of drives from LED Definitions.
For more information, see Hot-plug drive LED definitions on page 9.
2. Back up all server blade data on the drive.
3. Remove the drive.
Operations 35