Hpe Smart Array P204I Sr Gen10 Controller Option - HPE ProLiant BL460c Gen10 User Manual

2. Install the uFF drives in the SFF Flash Adapter.
3. Install the SFF Flash Adapter by pushing firmly near the left-side adapter ejection handle until the
latching spring engages in the drive bay.

HPE Smart Array P204i SR Gen10 Controller option

When the HPE Smart Array P204i SR Gen10 Controller is installed, this server blade supports the
following options:
• Up to two SAS or SATA SSDs
• Up to two SAS or SATA hard drives
• Up to two SFF Flash Adapters (up to 4 uFF drives)
48 Hardware options installation