Installing The Nvme Ssd Options - HPE ProLiant BL460c Gen10 User Manual

2. Prepare the drive.
3. Install the drive.
4. Determine the status of the drive from the drive LED definitions.
For more information, see Hot-plug drive LED definitions on page 9.

Installing the NVMe SSD options

The server blade supports hot-plug NVMe SSDs when configured for NVMe drive support.
Prerequisites
Before installing an NVMe SSD into a server blade, the server blade must be configured with the
following components:
• NVMe pass-through board
• NVMe backplane
Procedure
1. Remove the drive blank.
46 Hardware options installation