Memory Options; Dimm And Nvdimm Population Information; Dimm-Processor Compatibility; Hpe Smartmemory Speed Information - HPE ProLiant BL460c Gen10 User Manual

8. If necessary, repeat the M.2 SSD installation procedure for a second drive.
9. Install the left DIMM baffle (Install the DIMM baffles on page 25).
10. Install the access panel on page 23.
11. Install the server blade on page 42.
12. Power up the server blade on page 21.

Memory options

IMPORTANT: This server blade does not support mixing LRDIMMs and RDIMMs. Attempting to mix
any combination of these DIMMs can cause the server to halt during BIOS initialization. All memory
installed in the server blade must be of the same type.

DIMM and NVDIMM population information

For specific DIMM and NVDIMM population information, see the DIMM population guidelines on the
Hewlett Packard Enterprise website (http://www.hpe.com/docs/memory-population-rules).

DIMM-processor compatibility

The installed processor determines the type of DIMM that is supported in the server blade:
• First-generation Intel Xeon Scalable processors support DDR4-2666 DIMMs.
• Second-generation Intel Xeon Scalable processors support DDR4-2933 DIMMs.
Mixing DIMM types is not supported. Install only the supported DDR4-2666 or DDR4-2933 DIMMs in the
server blade.

HPE SmartMemory speed information

For more information about memory speed information, see the Hewlett Packard Enterprise website
(https://www.hpe.com/docs/memory-speed-table).

Installing a DIMM

The server supports up to 16 DIMMs.
60 Hardware options installation
3
2
1