Page 3-18
Field
Lamination Position
Automatically detect installed
laminate for every print job
PLT-02496, Version: 1.2
Description
Use this control to adjust the horizontal position of the laminate. Only
the horizontal position needs adjustment. Default is 0.
To adjust the position, click on the horizontal adjustment arrows. The
adjustment arrows point in the direction the patch will move on the
card. The maximum horizontal value is 100 Pixels (10 Pixels = 0.03
[0.8mm]).
Use the option to auto-detect the installed lamination.
Default: To automatically set the lamination dwell time and transfer
temperature.
Printing Preferences
May 2017