HID FARGO DTC 5500LMX User Manual page 62

Error Message Cause
#337
The card has jammed in the
Laminator Card
Laminator under the LAM1 station.
Jam
#338
The card has jammed in the
Laminator under the LAM 2
Laminator Card
station.
Jam
#339
A card has become jammed in the
Laminator Flipper
Laminator flipper.
Jam
#340
The system is unable to turn the
Laminator Flipper
Laminator flipper.
Jam
#341
A Card has become jammed in
Laminator Rotator
the Laminator rotator station.
Jam
#342
The system is unable to turn the
Laminator Rotator
Laminator rotator.
Jam
#343
The Laminator is unable to load
Reinstall LAM1
the LAM1 Laminate.
Laminate
#344
The Laminator is unable to load
Reinstall LAM2
the LAM2 Laminate.
Laminate
#345
A card has become jammed
LAM1 Lamination
under the Laminator LAM1 station.
Jam
PLT-02496, Version: 1.2
Troubleshooting
Solution
Open the Laminator lid. Clear any cards in the system by
pressing the card forward or backward buttons on the
display. Close the Laminator lid. Press the Resume button on
the Printer to continue printing. To cancel, press the Cancel
Print button or the Cancel button located on the Printer.
Open the Laminator lid. Clear any cards in the system by
pressing the card forward or backward buttons on the
display. Close the Laminator lid. Press the Resume button on
the Printer to continue printing. To cancel, press the Cancel
Print button or the Cancel button located on the Printer.
Open the Laminator lid. Clear any cards in the system by
pressing the card forward or backward buttons on the
display. Close the Laminator lid. Press the Resume button on
the Printer to continue printing. To cancel, press the Cancel
Print button or the Cancel button located on the Printer.
Open the Laminator lid. Clear any cards in the system by
pressing the card forward or backward buttons on the
display. Close the Laminator lid. Press the Resume button on
the Printer to continue printing. To cancel, press the Cancel
Print button or the Cancel button located on the Printer.
Open the Laminator lid. Clear any cards in the system by
pressing the card forward or backward buttons on the
display. Close the Laminator lid. Press the Resume button on
the Printer to continue printing. To cancel, press the Cancel
Print button or the Cancel button located on the Printer.
Open the Laminator lid. Clear any cards in the system by
pressing the card forward or backward buttons on the
display. Close the Laminator lid. Press the Resume button on
the Printer to continue printing. To cancel, press the Cancel
Print button or the Cancel button located on the Printer.
Open the Laminator lid. Follow the instructions on the label
located under the Laminator lid to remove and reinstall the
LAM1 laminate. Close the Laminator lid to resume.
Open the Laminator lid. Follow the instructions on the label
located under the Laminator lid to remove and reinstall the
LAM2 laminate. Close the Laminator lid to resume.
Open the Laminator lid to clear any cards in the system by
pressing the card forward or backward buttons on the
display. Clean the Laminator card transport rollers. Replace
cleaning rollers that are dirty. Close the Laminator lid. Press
the Resume button on the Printer to continue printing. To
cancel, press the Cancel Print button or the Cancel button
located on the Printer.
Page 5-8
May 2017