HID FARGO DTC 5500LMX User Manual page 22

Page 3-2
Field
Card Size
Orientation
Copies
Card Hopper
Selection
Diagnostics
ToolBox
Test Print
About
PLT-02496, Version: 1.2
Definition
CR-80: 3.452 x 2.204 inch (87.7 x 56 mm) is the only option available.
Inches/mm: Card sizes will display in inches or mm, depending on the option
selected.
Print Width & Print Length: The dimensions of the total print area for each card size.
Note: These print area dimensions are .04 in (1 mm) larger than the actual card size.
This allows the printer to overprint images to ensure they will appear edge-to-edge
when transferred to the card.
When designing a card format, always set the card size within the card design
program to the exact print length and width dimensions of the card.
Card Thickness (mil): Select the card thickness from the pull-down list.
Options are 30 (default), and 40 mil.
There are two selections for card printing orientation.
• Portrait prints card vertically.
• Landscape prints card horizontally.
Selects the number of copies to print.
First Available: Selects the first available hopper (default).
Top: Selects the top hopper.
Bottom: Selects the bottom hopper.
This launches the Workbench program, which is included on the driver CD.
See Chapter 4: ToolBox.
Sends one or more self-test prints to the printer.
This opens a dialog box containing the copyright information, the driver's version
number and date code.
Printing Preferences
May 2017