M1Ssicask1 Security Situation Intelligent Computer Node Module Leds; Leds Of Other Service Modules - H3C SecPath M9000 Series Manual

LED
LINK/ACT
M1SSICASK1 security situation intelligent computer node
module LEDs
The NSQM1SSICASK1 security situation intelligent computer node module provides LEDs to
indicate the operation status for the module and the hard disk.
Table 37 NSQM1SSICASK1 LED description
LED
System power
LED
System run
LED
UID button
LED

LEDs of other service modules

Other service modules than the NSQ1FWCEA0 and NSQM1SSICASK1 provide LEDs to indicate
the operation status for the module and the hard disk.
Status
Fast flashing (8 Hz)
Off
Steady green
Flashing
Mark Status
Steady green
Flashing green
Steady amber
Off
Steady green
Flashing green
Flashing green and
yellow
Flashing yellow
Steady green
Flashing green (1
RUN
Hz)
Off
Steady blue
Flashing blue (1 Hz)
UID
Flashing blue (4 Hz)
Off
Description
The card is loading software or has not started.
No link is present.
A link is present.
The port is sending or receiving data.
Description
The system has started.
The system is starting.
The system is in standby state.
No power input or the module is faulty.
The system is operating correctly.
HDM is initializing.
A general alarm has occurred, including HDM
alarms and hardware alarms.
A severe alarm has occurred, including HDM
alarms, hardware alarms, and processor alarms.
The module is faulty.
The module is operating correctly.
The module is faulty or is not present.
UID LED is activated.
The firmware is being upgraded or the system is
being managed from HDM.
HDM is restarting.
UID LED is not activated.
62