Removing A Fan Tray - H3C SecPath M9000 Series Manual

Removing a fan tray

CAUTION:
To ensure normal ventilation, install a new fan tray within two minutes after removing the old one.
To remove a fan tray:
Prepare an antistatic mat to place the fan tray to be removed.
1.
Loosen the captive screws on the fan tray, as shown in callout 1 on
2.
Hold the handle of the fan tray with one hand to gently pull the fan tray part way out of the
3.
chassis. After the fans stop rotating, support the bottom of the fan tray with the other hand, and
take out the fan tray from the chassis, as shown in callout 2 on
Put the removed fan tray on the antistatic mat.
4.
Figure 36 Removing a fan tray
(1) Loosen the captive screws on the fan tray (2) Take the fan tray out of the chassis
37
Figure 36.
Figure 36.