Figure8-2 Installing a MIC-X interface card
7.
Install the FIP with the MIC-X interface card in the target slot on the device. For the installation
procedure, see
Installing a FIP module
CAUTION:
• The FIP modules are hot swappable.
• If you are to install a MIC-X interface card on the device, first install it on a FIP module, and then
install the FIP module with it on the device.
To install a FIP module:
1.
(Optional.) Install MIC-X interface cards on the FIP module. For the MIC-X interface card
installation procedure, see
2.
Wear an ESD wrist strap and make sure the strap makes good skin contact and is reliably
grounded.
3.
Face the front panel of the device, use a Phillips screwdriver to loosen the captive screws on
the filler panel, and then remove the filler panel.
Figure8-3 Removing the filler panel
"Installing a FIP
module."
"Installing MIC-X interface
cards."
21