Air Filters; Transceiver Modules; Dc Power Cord; Ac Power Cord - H3C SecPath M9000 Series Manual

Table 29 Fan tray specifications
Fan tray
M9006 fan tray
M9010/M9010-GM
fan tray
M9014 upper fan tray
M9014 lower fan tray
NOTE:
When the fan tray is damaged and needs to be replaced, select a new fan tray compatible with your
gateway.

Air filters

CAUTION:
Clean air filters periodically (at least once every three months) to guarantee adequate ventilation
and avoid over-temperature.
To prevent dusts from entering the chassis, you can configure air filters for the gateway as needed
and install the air filters at the air inlet vents.
The M9000 security gateway air filters include the M9006 air filter, the M9010 air filter, the
M9010-GM air filter, and the M9014 air filter. Order air filters compatible with your gateway.

Transceiver modules

The M9010 gateway series supports multiple types of transceiver modules. For the transceiver
modules available for the ports on an interface module or a service module, see the user guide for
the interface module or the service module.

DC power cord

DC power cords are used for connecting the DC power modules of an M9000 gateway to the
external DC power supply system.
Table 30 DC power cord specifications
DC power cord
0404A0E1
0404A0E2

AC power cord

AC power cords are used for connecting the power modules of an M9000 gateway to the external AC
power supply system.
Number of
Fan diameter
fans
8 92 mm (3.62 in)
12 120 mm (4.72 in)
8 120 mm (4.72 in)
4 120 mm (4.72 in)
Cable length
3 m (9.84 ft)
15 m (49.21 ft)
56
Maximum Maximum air
rotating speed flow rate
6000 RPM 960 CFM
5200 RPM 1152 CFM
5200 RPM 1040 CFM
5200 RPM 720 CFM
Description
Used on the NSQM1DC2400
power module