FIP module LEDs
Figure 3-2 FIP module LEDs
(1) 10GBASE-R-SFP+ Ethernet fiber port LEDs 0 through 3
(2) 1000BASE-X-SFP Ethernet fiber port LEDs 4 through 19
(3) Remove button/LED
Table 3-2 FIP module LED descriptions
LED
10GBASE-R-SFP+ 0 to 3
1000BASE-X-SFP 4 to
19
Remove button/LED
Status
Steady green
Flashing green (3 Hz)
Steady yellow
Flashing yellow (3 Hz)
Off
Steady green
Flashing green (3 Hz)
Steady yellow
Flashing yellow (3 Hz)
Off
Steady green
Flashing green (8 Hz)
Off
3-3
Description
A 10 Gbps link is present on the port.
The port is sending or receiving data at 10 Gbps.
A 1000 Mbps link is present on the port.
The port is sending or receiving data at 1000 Mbps.
No link is present on the port.
A 1000 Mbps link is present on the port.
The port is sending or receiving data at 1000 Mbps.
A 100 Mbps link is present on the port.
The port is sending or receiving data at 100 Mbps.
No link is present on the port.
The FIP module is operating correctly and the
MIC-X interface module can be hot swapped.
The FIP module or MIC-X interface module is being
initialized and the MIC-X interface module cannot
be hot swapped.
You can remove the FIP module.