Power Modules; Fan Trays - H3C SecPath M9000 Series Manual

Switching fabric module model
NSQ1FAB08D0
NSQ1FAB12D0

Power modules

The gateway supports power modules of models NSQM1AC2500 and NSQM1DC2400. An
NSQM1AC2500 power module is an AC-input, DC-output power module that provides a maximum
DC output power of 2500 W. An NSQM1DC2400 power module is a DC-input, DC-output power
module that provides a maximum DC output power of 2400 W.
Table 28 NSQM1AC2500 and NSQM1DC2400 power module specifications
Item
Rated input voltage
range
Rated output voltage
Maximum input current
Maximum output current
Maximum output power
Temperature
requirements
You can select a certain number of power modules according to the actual power consumption
requirements. Make sure that the total maximum output power of the ordered power modules is
greater than the system power consumption. As a best practice, reserve 20% of the maximum output
power.
NOTE:
• Power modules of different models cannot be installed on the same gateway.
• When the temperature of a power module exceeds the normal operating temperature, the power
module is automatically powered off. When the temperature recovers to the normal temperature,
the power module is automatically powered on.

Fan trays

Table 29 shows the fan trays that each M9000 gateway supports. Every M9000 gateway comes with
fan trays installed.
Applicable gateways
M9010
M9010-GM
M9014
NSQM1AC2500
100 VAC to 240 VAC @ 50/60 Hz
12 VDC
16 A
•
100 A (110 VAC)
•
208A (220 VAC)
•
1200 W (110 VAC)
•
2500 W (220 VAC)
Operating temperature: –10°C to
+50°C (14°F to 122°F)
Storage temperature: –40°C to +85°C
(–40°F to +185°F)
55
NSQM1DC2400
–48 VDC to –60 VDC
12 VDC
60 A
200 A
2400 W
Operating temperature: –10°C to
+50°C (14°F to 122°F)
Storage temperature: –40°C to +85°C
(–40°F to +185°F)