Table of Contents
Advertisement
Installation Manual
H3C SecPath V100-S Security Gateway
Boot ROM
SDRAM
Flash
Dimensions (W × D × H)
Weight
Power input
Max. power consumption
Operating temperature
Operating humidity (noncondensing)
Note:
Synchronous dynamic random access memory (SDRAM) stores the communication
data of the running system with the CPU.
Flash is the major file storing medium where application files, traps, and configuration
files are stored.
Boot read only memory (Boot ROM) stores the bootstrap program files.
1.2.3 LEDs
See Table 1-2 for the meaning of the LEDs on the front panel of SecPath V100-S.
Table 1-2 LEDs on the front panel of the SecPath V100-S
LED
PWR
SYS
LINK/ACT
Item
Power supply unit (PSU) LED:
OFF means the PSU is not supplying power to the device. ON
means the PSU is supplying power to the device.
System operating status LED:
Blinking means the system is operating normally. OFF means the
system is operating abnormally.
OFF means no link is present. ON means a link is present. Blinking
means packets are being transmitted/received.
1-4
Chapter 1 Product Introduction
Specification
512 Kbps
128 Mbps
8 Mbps
300 × 220 × 42 mm (11.8 × 8.7 × 1.7 in.)
(excluding rubber feet)
2 kg (4.4 lb.)
Rated voltage: 100 VAC to 240 VAC,
50Hz or 60 Hz
Rated current: 0.2 A
9 W
o
o
o
0
C to 40
C (32
F to 104
10% to 90%
Meaning
o
F)
Advertisement
Table of Contents
