Interface Subcards - H3C SecPath M9000 Series Manual

Interface
module
model
NSQ1CGC2
SE0
NSQM1TGS
32QSSG0
NOTE:
A combo interface is a logical interface that contains one fiber port and one copper port. The two
ports share one interface view and cannot work simultaneously. You can use the combo enable
{ copper | fiber } command to activate the fiber or copper port as needed. When you enable
one of the two ports, the other port is automatically disabled. The default operating port is the copper
port.

Interface subcards

The subcards are installed on the subslots of the interface switch modules. The subcards available
for the M9000 gateway series are described in
Table 19 Interface subcard specifications
Interface
subcard
model
NSQM2TG16
GP40
NSQM1CGQ2
0
NSQM2QG4
GP40
Description Connector
2-port 100-Gigabit
CFP optical
LC
Ethernet interface
module
32-port 10-Gigabit +
LC
4-port 40-Gigabit
optical Ethernet
MPO
interface module
Description
4-port 1000BASE-X
+ 16-port
10GBASE-R optical
interface module
2-port 100GBASE-R
optical interface
module
4-port 1000BASE-X
+ 4-port
40GBASE-R optical
interface module
Number
of ports
2
32
4
Table 19.
Number
Connector
of ports
4
LC
16
LC 2
4
LC
4
50
Port Available
transmission transceiver
rate modules
100-Gigabit CFP
100 Gbps
transceiver module
Gigabit SFP
1 Gbps
transceiver module
QSFP+ transceiver
40 Gbps
module
Port Available
transmission transceiver
rate modules
Gigabit SFP
1 Gbps transceiver
module
10-Gigabit SFP+
10 Gbps transceiver
module
QSFP28
100 Gbps transceiver
module
Gigabit SFP
1 Gbps transceiver
module
QSFP+
40 Gbps transceiver
module