Preparing For Installation; Safety Recommendations; General Safety Recommendations; Electricity Safety - H3C SecPath M9000 Series Manual

Hide thumbs Also See for SecPath M9000 Series:
Table of Contents

Advertisement

Preparing for installation

The H3C SecPath M9000 Multi Service Security Gateway Series includes the following models:
M9006.
M9010.
M9010-GM.
M9014.

Safety recommendations

To avoid bodily injury and equipment damage, read all safety recommendations carefully before
installation. Note that the recommendations do not cover every possible hazardous condition.

General safety recommendations

Keep the gateway clean and dust-free.
Do not place the gateway on a moist area, and avoid liquid flowing into the gateway.
Make sure the ground is dry and flat and anti-slip measures are in place.
Keep the gateway and installation tools away from walk areas.
Do not wear loose clothing, jewelry (for example, necklace) or any other things that could get
caught in the chassis when you install and maintain the gateway.

Electricity safety

Clear the work area of possible electricity hazards, such as ungrounded power extension
cables, missing safety grounds, and wet floors.
Locate the emergency power-off switch in the room before installation so you can quickly shut
power off when an electrical accident occurs.
Unplug all external cables, including power cords, before moving the chassis.
Do not work alone when the gateway has power.
Always verify that power has been disconnected from a circuit.

Handling safety

CAUTION:
Do not hold the handle of the fan tray, power module, or back cover of the chassis, or the air vents of
chassis to move the gateway. Any attempt to move the gateway with these parts might cause
equipment damage and even bodily injury.
When you move the gateway, follow these guidelines:
Remove all external cables, including the power cords, before moving the chassis.
Moving the chassis requires at least two people, and you can use a mechanical lift as needed.
Lift and put down the chassis slowly and never move suddenly.
Hold the handles of the chassis.
1

Advertisement

Table of Contents
loading

Table of Contents