Installation Tools - H3C SecPath M9000 Series Manual

•
The equipment room is at least 3 m (9.84 ft) high.
•
Reserve a minimum of 1 m (3.28 ft) of clearance between the rack and walls or other devices.
•
The dimensions of the rack are sufficient for the chassis. For more information about chassis
specifications, see
Table 5 Device dimensions and rack requirements
Model
M9006
M9010/M9010-GM
M9014

Installation tools

Table 6 lists the tools and equipment that you might use during installation, and all of them are user
supplied. Prepare them before installation.
Table 6 Tools and equipment list
Category
Measuring and
marking tools
Drills
"Appendix A Chassis views and technical
Chassis dimensions
•
Height—353 mm (13.90 in)/8 RU
•
Width—440 mm (17.32 in)
•
Depth—757 mm (29.80 in)
660 mm (25.98 in) for the chassis
95 mm (3.74 in) for the cable
management bracket at the front of
the chassis
24 mm (0.94 in) for the switching
fabric module ejector levers at the
rear of the chassis
•
Height—886 mm (34.88 in)/20 RU
•
Width—440 mm (17.32 in)
•
Depth—757 mm (29.80 in)
660 mm (25.98 in) for the chassis
95 mm (3.74 in) for the cable
management bracket at the front of
the chassis
24 mm (0.94 in) for the switching
fabric module ejector levers at the
rear of the chassis
•
Height—797 mm (31.38 in)/18 RU
•
Width—440 mm (17.32 in)
•
Depth—757 mm (29.80 in)
660 mm (25.98 in) for the chassis
95 mm (3.74 in) for the cable
management bracket at the front of
the chassis
24 mm (0.94 in) for the switching
fabric module ejector levers at the
rear of the chassis
Tool
Long tape, ruler (of 1 meter, or 3.28 ft), gradienter, marker, chalk line, and pencil
Hammer drill, electric drill, and several auxiliary drill bits
6
specifications."
Rack requirements
•
A minimum of 1.0 m
(3.28 ft) in depth
(recommended)
•
A minimum of 130 mm
(5.12 in) between the
front rack post and the
front door
•
A minimum of 690 mm
(27.17 in) between the
front rack post and the
rear door