Appendix B Leds - H3C MSR3610-I-DP Installation Manual

Appendix B LEDs

Figure 22 LEDs
(1) System status LED (SYS)
(3) Power status LED (PWR2)
(5) LEDs for Ethernet fiber ports SFP0 and SFP1
(7) Hard disk LED (HD)
Table 9 LED description
LED
System status LED
(SYS)
Status
Fast flashing green
Slow flashing yellow
Fast flashing yellow
Off
Steady green
Fast flashing green
Slow flashing green
Steady yellow
Slow flashing yellow
Off
Fast flashing green (5
seconds)
Fast flashing yellow (10
seconds)
29
1
2
3
5
6
7
(2) Power status LED (PWR1)
(4) LEDs for Ethernet copper ports GE0 to GE7
(6) Power button/LED
Description
BIOS has started successfully.
The memory does not exist or system
initialization has failed.
BIOS stage
The extended segment does not exist.
No power input, or exceptions have
occurred.
The SDRAM is performing self-test.
The system software image is being
decompressed.
Comware is starting up and the
system is operating correctly.
BootWare
stage
The system software image does not
exist.
The SDRAM has failed the self-test.
No power input, or exceptions have
occurred.
The USB disk completed auto
configuration.
Comware
stage
The USB disk has failed auto
configuration.
4