Configurable Functions; Diagnostics; Process Image; Display Devices - Bosch Rexroth IndraControl S67-S3-BK-DI8-M8 Application Description

DOK-CONTRL-S67S3BKDI8*-AP03-EN-P
Rexroth IndraControl S67 Sercos Coupler 8 Digital Inputs (M8)
4.11.6

Configurable Functions

4.11.7

Diagnostics

4.11.8

Process Image

4.11.9

Display Devices

4.11.10

COM Service Interface

Input current
Cable length, unshielded
Incorrect connection of inputs
Tab. 4-11: Digital inputs
Field bus coupler
Digital inputs
Input filter (per channel)
Tab. 4-12: Parameterizable functions
Per module
Per module
Tab. 4-13: Diagnostics
Input process image
Output process image
Tab. 4-14: Process image
MS: module status
S3: Sercos status
ACT/LNK 1: FB1
Data exchange/network connection
ACT/LNK 2: FB2
Data exchange/network connection
CS : controller status
0 ... 7: Input signal status
F: Error status
24 V U : Status of the supply U
LS
24 V U : Status of the supply U
A
SBM: Status of S-BUS Master
Displays
Tab. 4-15: Displays
Type
Connection type
Tab. 4-16: Service interface
Bosch Rexroth AG
Device Description of Field Bus Coupler
Typically 2.8 mA
≤ 30 m
No effect
0.1/0.5/3/15/20 ms/filter off
Short circuit of the sensor supply U
Undervoltage (U
LS
2048 bytes
2048 bytes
LED (green/red)
LED (green/red)
LED (green)
LED (green)
LED (green/red)
LED (yellow)
LED (red)
LED (green)
LS
LED (green)
A
LED (green/red)
Non-storing
USB standard 1.1
M8 male connectors, 4-pin
25/139
LS
+ U )
A