48/139
Bosch Rexroth AG
Web-Based Management (WBM)
8.3
"Status Information"Page
Rexroth IndraControl S67 Sercos Coupler 8 Digital Inputs (M8)
After entering the IP address, the "information" start page for web-based
management appears. This site provides information on the field bus coupler,
the network and the blink code.
Fig. 8-2:
"Status information" page
The following table explains the parameters listed on the page:
Coupler details
Description
Order number
Display of the order number of the field bus coupler.
MAC address
Indicates the MAC address used to identify and address the
field bus coupler.
Firmware revision
Indicates the current status of the firmware
Firmware release
Displays the current status of the release index (firmware,
index
hardware, firmware loader)
HTML pages revi‐
Displays the current status of the version of the WBM pages
sion
Network details
IP Address
Displays the source of the IP address and current IP address
of the field bus coupler
Subnet Mask
Displays the current subnet mask of the field bus coupler
DOK-CONTRL-S67S3BKDI8*-AP03-EN-P